9v-regulator_en

+9v GND -9v POWER SUPPLY

This post is also available in: Türkçe Azerbaycan Türkcesi Русский

  • During analog to digital conversion with PIC the noise occurs
  • The problem is current from the supply because it does not absorb enough the noise ,We have developed a circuit for it (together with my brother) ;-)
  • Circuit transformer, capacitor and diode is comprised of. Operating logic, capacitors absorb noise.
  • Three output transformer should be selected. Because the output  (+9v)  (GND)  (-9v)
  • IMPORTANT! – Works with PIC s 5v circuit voltage of 5 volts should regulate, or PIC will be damage!!!.(9v>5v regulator circuit)

Required Materials

  1.  1 PCS – 130 mm x 60 mm Pertinaks
  2.  1 PCS – 2s Tunic Socket (220V for input)
  3.  1 PCS – Button  (220v for open-close )
  4.  1 PCS – 9v transformer (Three output transformer should be selected)
  5.  1 PCS  – B500C2300 Bridge Diode
  6.  2 PCS – 1000uf electrolytic  capacitor (50V)
  7.  2 PCS – 100 nf polyester Capacitors
  8.  1 PCS – 3k3 resistor
  9.  1 PCS – LED
  10.  3 PCS – Precision socket or other socket

Circuit Schematic

+9 gnd -9 v trafo devresi
+9 gnd -9 v trafo devresi şeması

Technical Documents



About ERCAN123 KOÇLAR

Çalışmalarım çocukken başladı kolonyalı kağıtları yakmak, ilaçları birbirine katmak gibi değişik deneylerim vardı. Kimya kitabında elektroliz ile suyun hidrojen ve oksijene ayrıldığı ve hidrojenin yandığını yazıyordu, o zamanlarda aklım almıyordu sudan nasıl yanan….Devamını okumak için tıklayınız ;)