mathematical-solution-of-touch-panel-calibration

MATHEMATICAL SOLUTION OF TOUCH PANEL CALIBRATION

Video Lesson Touch Panel Calibration 2 Point Calibration Method Mathematical Solution of Calibration Calculation of Deviation Values Calculation of Deviation Values “a1” and “b1” Calculation of Deviation Values “a2” and “b2” Calculation of Deviation Values “c1” and “d1” Calculation of Deviation Values “c2” and “d2” Deviation Values Result Table Calibration by Using Result Formula Result […]

mikroc-in-library-preparation

Lesson1 – MikroC in LIBRARY PREPARATION

Properties of the library Hardware Control – Example ,  LCD ,SDcard etc. Code prevents confusion Professional software The library is portable and flexile You can ask your questions in the comments ! Code extern sfr sbit LED; extern sfr sbit LED_TRIS; #define saniye 1000 //fonksyonlar.c Code #include “header.h” void LED_YAK(unsigned char sure) { LED_TRIS=0; LED=0; vdelay_ms(sure*saniye); LED=1; } void […]

5v-regulator-en

+5v -5v 3.3v SWITCH MODE REGULATOR

I developed for my PIC projects but can be used in general-purpose.  9v>5v and 5v>3.3v  switch mode regulator 3.3v is available in SD card and MMC card project No noise with Switch Mode system I would particularly recommend , the use of high-speed crystals I would recommend the use of tantalum capacitors IMPORTANT! – Tantalum capacitors can explode if connected incorrectly Required Materials […]

9v-regulator_en

+9v GND -9v POWER SUPPLY

During analog to digital conversion with PIC the noise occurs The problem is current from the supply because it does not absorb enough the noise ,We have developed a circuit for it (together with my brother) ;-) Circuit transformer, capacitor and diode is comprised of. Operating logic, capacitors absorb noise. Three output transformer should be selected. […]