MikroC – CRC библиотека

MikroC – CRC LIBRARY

You can use the CRC library that I wrote at MicroC for data communication. The CRC “Circular Residual Capacity” is a world-class control system that checks whether data is transmitted correctly. CRC is a tool that must be used in all standard data communication from SD card to HDD. In the library there are CRC […]

mikroc-in-library-preparation

Lesson1 – MikroC in LIBRARY PREPARATION

Properties of the library Hardware Control – Example ,  LCD ,SDcard etc. Code prevents confusion Professional software The library is portable and flexile You can ask your questions in the comments ! Code extern sfr sbit LED; extern sfr sbit LED_TRIS; #define saniye 1000 //fonksyonlar.c Code #include “header.h” void LED_YAK(unsigned char sure) { LED_TRIS=0; LED=0; vdelay_ms(sure*saniye); LED=1; } void […]

5v-regulator-en

+5v -5v 3.3v SWITCH MODE REGULATOR

I developed for my PIC projects but can be used in general-purpose.  9v>5v and 5v>3.3v  switch mode regulator 3.3v is available in SD card and MMC card project No noise with Switch Mode system I would particularly recommend , the use of high-speed crystals I would recommend the use of tantalum capacitors IMPORTANT! – Tantalum capacitors can explode if connected incorrectly Required Materials […]

9v-regulator_en

+9v GND -9v POWER SUPPLY

During analog to digital conversion with PIC the noise occurs The problem is current from the supply because it does not absorb enough the noise ,We have developed a circuit for it (together with my brother) ;-) Circuit transformer, capacitor and diode is comprised of. Operating logic, capacitors absorb noise. Three output transformer should be selected. […]